Click Here to Purchase Our Products Online!
Fuel Management Systems Gasoline Formula
Our gasoline formula is designed for all gasoline engines. It is designed to lubricate the upper end of the combustion chamber and slow down the burn process just as octane does. This creates a more complete burning of the fuel and it allows our customers to use lower octane instead of premium fuel with no change in the vehicles performance as seen in our test studies. Our formula also blocks many unwanted chemicals which are added by the refineries. These chemicals actually reduce vehicle performance.
The MPG gain on our test vehicles have shown an increase of 10% to 20% in MPG. This is based on testing done using a modified test car which holds a small amount of fuel and is driven until empty. Miles driven and gallons used is a very accurate way of determining fuel consumption. We use controlled conditions and also test using dyno machines.
Please refer to our
FAQ section if you have any questions about our Gasoline Formula or simply call our tech support line (561) 833-9300.
Fuel Management Systems Diesel Formula
Our diesel formula is designed for all diesel engines. Diesel fuel has changed over the past several years and does not contain the same amount of sulfur as it did in past years. There has been a 97% decrease in the amount of sulfur in the new Ultra Low Sulfer Diesel (ULSD) fuel currently being sold in over 80% of the stations in the U.S. (this number will be 100% by 2010).
Our formula replaces the lubricity that was lost when refineries removed the sulfur from the fuel. Our formula also increases the cetane which makes the fuel burn more complete. A more complete burn is visibly noticeable though reduction of smoke at engine start up. Under hard acceleration there is also a noticeable increase in engine performance.
Our Diesel Formula increases fuel mileage 10% to 20% in the over the road trucks we have tested. It raises the cetane, lubricates, cleans, reduces smoke, increases power, and reduces the need for costly repairs by prolonging engine life.
Please refer to our
FAQ section if you have any questions about our Diesel Formula or simply call our tech support line.
Fuel Management Systems Cetane Improver
Our Cetane Improver is designed to work together with our Diesel Fuel Formula and should not be used by itself. It is designed to increase the cetane number of the fuel by approximately 1 number. Increasing the cetane number makes the fuel burn more complete.
Fuel Management Systems Oil Formula
Our oil formula is a combination of various materials that reduce friction and harmonic distortion in your engine. Reduced friction means the engine does not have to work as hard.
In testing our oil formula we have seen a 2% to 5% increase in fuel consumption. Our oil formula also reduces engine wear, reduces engine noise, lowers engine temperatures, increases compression, reduces emissions and lowers oil consumption on high mileage engines.
Coming soon!
Fuel Management Systems Grease Formula (New)
Our grease formula offers the same friction reducing properties as our oil formula. It will be available as multi purpose grease in a tube with both a regular and a marine grade.